48V 200Ah Energy Storage LiFePo4 Battery Modular

1、Scope of application documents

The specification of this product is only applicable to the protection parameters of a rechargeable lithium-ion battery Product and cell designed by Foshan EnrSaver New Energy Technology Co., Ltd.

2、The Specification Amendment

If the raw materials, production processing, production system or battery usage environments & other conditions need to be changed, the amendment side needs provide the written advice to the other side, only the both sides come to agreement, the amendment will be effective.

3、Product or Cell testing conditions

It is recommended to use newly produced battery packs and new cells for related tests.Unless specified, testing and measurement shall be done under temperature of 20±5℃ and relative humidity of 45~75%.

4、Standard

4.1 Reference Standard GB 31241-2014 UL1642

GB/T 31486-2015

GB/T 31485-2015

GB/T 31484-2015

4.2 Measuring Instrument and Apparatus

.1 Dimension Measuring Instrument

The dimension measurement shall be implemented by instruments with equal or more precision scale of 0.02mm.

.2 Voltmeter

Standard class specified in the national standard or more sensitive class having inner impedance more than 10kΩ/V

.3 Ammeter

Standard class specified in the national standard or more sensitive class. Total external resistance including ammeter and wire is less than 0.01Ω.

.4 Impedance Meter

Impedance shall be measured by a sinusoidal alternating current method(1kHz LCR meter).

4.3 Testing Conditions (Unless Specially Requirements) Atmosphere Pressure ： 86~106kPa Temperature：20℃±5℃

Relative Humidity：≤75%

5. Main specifications (IFP23140160-100Ah )

5.1 Cell Battery specifications

5.1 Battery Pack specifications for single module

5.3.1 Battery Management System 电池管理系统规范A：BMS function introduction（BMS 功能介绍） 1）:The BMS is designed for 15 series lithium battery.

2）：The BMS have all functions which are :（该 BMS 系统具有以下一些功能）

.1 overcharge detection function（过充电保护功能）

.2 over discharge detection function（过放电保护功能）

.3 over current detection function（过电流保护功能）

.4 short detection function（短路保护功能）

.5 Temperature detection function 温度保护功能

.6 balance function（均衡功能）

.7 communicate function (通讯功能)

.8 Alarm function (告警功能,电量板显示)

.9 Total capacity function (总容量功能)

.10 Storage history function (存储历史记录功能)

B： BMS Protect parameter（电池管理系统保护参数）(software set)

5. Appearance and structural dimensions 

There shall be no such defect as scratch, bur and other mechanical scratch, and the connector should be no rust dirt. The structure and dimensions see attached drawing of the product.

5.1 Main control box 外观

Battery module

If there is any change in the pin position of the communication line, the customer shall be notified in writing or provided with supporting communication wire.通信线脚位如有变，需书面知会客户或提供配套通信线材．

6.1 SOC Indicator & Status Indicator Guides

Chart 1: Battery Status

Chart 2: Battery Capacity

Chart 3: LED flash mode

Chart4: LED flash mode

Address Switch function (Only in Parallel)（地址设置）

Complete product image 完整产品图：

6. Storage and Others

6.1 Long Time Storage

If stored for a long time(don’t used,exceed three months), the cell should be stored in drying and cooling place. The PACK is to be stored in a condition that the temperature of 23±2℃ and the humidity 0f 45%- 75%. Long-term use of unused batteries to recharge every 3 months。Ensure that the battery voltage is within the above range。

Appendix

Li-ion battery operation instructions and precautions

Preface

This document of 'Handling Precautions and Guideline Li-ion Rechargeable Batteries' shall be applied to the battery cells manufactured by EnrSaver.

Note (1) ：

The customer is requested to contact Foshan EnrSaver New Energy Technology Co., Ltd.. in advance, if and when the customer needs other applications or operating conditions than those described in this document. Additional experimentation may be required to verify performance and safety under such conditions.

Note (2) ：

Foshan EnrSaver New Energy Technology Co., Ltd. will take no responsibility for any accident when the cell is used under other conditions than those described in this Document.

Note (3)：声明三

Foshan EnrSaver New Energy Technology Co., Ltd. will inform, in a written form, the customer of improvement(s) regarding proper use and handling of the cell, if it is deemed necessary.

Warning!

— Do not immerse the battery in water or allow it to get wet.

— Do not use or store the battery near sources of heat such as a fire or heater.

— Do not use any chargers other than those recommended by TGPRO.

— Do not reverse the positive(+) and negative(-) terminals.

— Do not connect the battery directly to wall outlets or car cigarette-lighter sockets.

— Do not put the battery into a fire or apply direct heat to it.

— Do not short-circuit the battery by connecting wires or other metal objects to the positive(+) and negative(-) terminals.

— Do not pierce the battery casing with a nail or other sharp object, break it open with a hammer, or step on it.

— Do not strike, throw or subject the battery to sever physical shock.

— Do not directly solder the battery terminals.

— Do not attempt to disassemble or modify the battery in any way.

— Do not place the battery in a microwave oven or pressurized container.

— Do not use the battery in combination with primary batteries(such as dry-cell batteries) or batteries of different capacity, type or brand.

— Do not use the battery if it gives off an odor, generates heat, becomes discolored or deformed, or appears abnormal in any way. If the battery is in use or being recharged, remove it from

the device or charger immediately and discontinue use.

Caution!

Do not use or store the battery where is exposed to extremely hot, such as under window of a car in direct sunlight in a hot day. Otherwise, the battery may be overheated. This can also reduce battery performance and/or shorten service life.

If the battery leaks and electrolyte gets in your eyes, do not rub them. Instead, rinse them with clean running water and immediately seek medical attention. If left as is, electrolyte can cause eye injury.

Responsibility

Company Style

FAQ

Do you have a certificate？
All our products have certificates, mainly European certificates, CE, TUV, DEKRA, etc....more